FujiFilm Frontier-S DX100, Service Manual

Page: 157 / 303

157
4.5Disassembly and Assembly Procedure
DX100 Service Manual
17. Remove the grounding spring from the groove on the SMAP Roller and the hole of the
frame.
18. Detach the tab of the left bush from the frame using tweezers, and rotate it in the
direction of the arrow to align it with the hole on the frame.
Figure 4-106. Removing the SMAP Roller (1)
19. Remove the SMAP Roller from the hole of the frame.
Figure 4-107. Removing the SMAP Roller (2)
C A U T I O N
In the next step, make sure of the following.

Prevent the coated surface of the SMAP Roller from being scratched.

Do not touch the coated surface of the SMAP Roller with bare hands.

Be careful not to bend the PF scale.
SMAP Roller
Grounding Spring
Hole
Groove
Left bush
Hole
Tab
When installing the SMAP Roller, be careful not to damage the PF Scale.
(See
Figure 4-107 )
A D J U S T M E N T
R E Q U I R E D
Carry out the adjustments referring to "5.1.2 Adjustment Items and the
Order by Repaired Part" (p210) when the SMAP Roller is removed or
replaced.
Lubrication Lubrication
Lubricate the parts referring to " 6.3 Lubrication (p280) " when the SMAP
Roller is replaced.
SMAP Roller
Coated surface
Hole
PF Scale