FujiFilm Frontier-S DX100, Service Manual

Page: 140 / 303

140
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.7 Decurl Roller/Driven Roller (1/2)
4.5.5.7.1 Decurl Roller
1. Remove the Trimmed Waste Paper Box. (P.98)
2. Remove the Roll Unit. (P.130)
3. Remove the Sheet.
(
"4.5.6.10 Roll End Sensor" Step3 (p173) )
4. Remove the Roll End Sensor.
(
"4.5.6.10 Roll End Sensor" Step4 (p173) )
5. Remove the screw, and remove the frame.
B) Silver M3x6 Bind machine screw : one piece
Figure 4-76. Removing the frame
6. Remove the two torsion springs.
Figure 4-77. Removing the torsion spring
7. Release both ends of the Decurl Roller from the holes on the right and left of the frame.
Figure 4-78. Removing the Decurl Roller
Frame
D
Lubrication Lubrication
Lubricate the parts referring to " 6.3 Lubrication (p280) " when the Decurl
Roller is replaced.
Torsion spring
Torsion spring
Decurl Roller
Hole
Hole