FujiFilm Frontier-S DX100, Service Manual

Page: 240 / 303

240
5.4Carriage Related Adjustment
DX100 Service Manual
9. Set the adjustment pattern on the Scanner.
Figure 5-39. Setting the Printed Pattern (2)
10. Align and set the DOCUMENT HOLDING JIG with the two tabs on the side with
size markings on the document glass.
Figure 5-40. Setting the Printed Pattern (3)
11. Click [Scan] to scan the adjustment pattern. (See Figure 5-37 )
12. The correction value will be written.
C H E C K
P O I N T
Make sure of the following when setting the printed pattern.

Place the adjustment pattern with the characters toward you (near the
power switch side (opposite to the hinges)). (See
Figure 5-37 )

Align the right end of the Adjustment pattern with the concave of the
scale.
Concave
SCANNER ADJUSTMENT JIG
Adjustment pattern
C H E C K
P O I N T
If there is something wrong with the scanner reading of the printed pattern,
perform
"Troubleshooting for the scanner reading errors" (p241)
Rib Rib
DOCUMENT HOLDING JIG