FujiFilm Frontier-S DX100, Service Manual

Page: 241 / 303

241
5.4Carriage Related Adjustment
DX100 Service Manual
C H E C K
P O I N T
Table 5-6. Troubleshooting for the scanner reading errors
Cause Remedy
Something wrong with the connection
between the Scanner and the PC. Check the connection between the
Scanner and the PC.
The image cannot be saved because
the free HDD space of the PC is too
small. Increase the free HDD space of the
PC.
The setting position of the adjustment
pattern is wrong.
(misaligned, upside down, etc.) Set the adjustment pattern on the
document glass correctly.
The setting position of the SCANNER
ADJUSTMENT JIG is wrong. Set the SCANNER ADJUSTMENT
JIG on the document glass correctly.
Dirt (foreign material, etc.) is detected
on the scanned image. Wipe off the dirt on the surface of the
document glass and adjustment
pattern.
Missing dots Carry out the Head Cleaning. (p. 222)
Mixed color is occurring on the print
head.
Adjustment pattern is printed on the
skew. Feed the media straight and print the
print pattern again.
The printing pattern is not printed
correctly because the adjustment of
Print Timing Correction 1/2 is not
sufficient. Carry out the Bi-d Adjustment. (p.
233)