FujiFilm Frontier-S DX100, Service Manual

Page: 120 / 303

120
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.4.2 Print Head
1. Remove the Top Cover. (P.97)
2. Remove the Upper Cover. (P.100)
3. Remove the Remove the Trimmed Waste Paper Box. (P.98)
4. Remove the Front Cover. (P.100)
5. Remove the Self Sealing Valve. (P.116)
6. Remove the two valve holder spacers.
7. Remove the porous pad.
8. Remove the three screws that secure the Print Head.
A) Silver M2.6x8 P-tite screw: three pieces
9. Disconnect the Head FFC from the Print Head while lifting the Print Head, and remove
the Print Head.
Figure 4-49. Removing the Print Head
C A U T I O N
When connecting/disconnecting the Head FFC to/ from the connector,
follow the precautions below. Otherwise the Print Head may be damaged.

Insert the FFC terminal firmly into the connector.

Do not damage the metallic foil of the FFC terminal.

Before applying current, confirm there is no slant connection of the
FFC.
A
Print Head
A
A
Porous pad
Print Head
Head FFC
Valve holder spacer
Valve holder spacer
1
2
3