FujiFilm Frontier-S DX100, Service Manual

Page: 192 / 303

192
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.8.5 Heater Unit
1. Remove the Top Cover. (P.97)
2. Remove the Upper Cover. (P.100)
3. Remove the Trimmed Waste Paper Box. (P.98)
4. Remove the Front Cover. (P.100)
5. Remove the Left Heater Duct/Right Heater Duct. (P.189)
6. Remove the Cutter Unit. (P.163)
7. Remove the two screws that secure the heater Unit prop.
A) Silver M3x6 S-tite screw: two pieces
8. Remove the five screws that secure the Heater Unit.
B) Silver M3x6 S-tite screw: five pieces
9. Remove the screw that secure the grounding wire.
C) Silver M4x5 S-tite screw with external tooth washer : one piece
10. Disconnect the relay connector at the left side.
11. Disconnect the relay connector of receive side from frame at the left side.
12. Release the cable from the wire saddle.
13. Disconnect the cables from the three relay connectors at the right side.
14. Release the cable from the wire saddle.
Figure 4-159. Removing the Heater Unit (1)
B
Left
C
Grounding Wire
Wire saddle
Relay connector
B
Right
Wire saddle
Cable
Heater Unit
B
B
Relay connectors
Right
Heater Roller Holder
B
A A
Relay connector
Left
Heater Unit prop