FujiFilm Frontier-S DX100, Service Manual

Page: 172 / 303

172
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.6.9 Roll Set Sensor
1. Remove the Trimmed Waste Paper Box. (P.98)
2. Remove the Roll Unit. (P.130)
3. Remove the eleven screws, and remove the two sheets.
A) Silver M3x6 P-tite screw : eleven pieces
4. Remove the screw, and remove Roll Set Sensor from the grounding plate.
B) Silver M3x6 S-tite screw: one piece
Figure 4-130. Removing the sheet
5. Disconnect the cable from the connector of the sensor.
6. Disengage the four hooks, and remove the sensor.
Figure 4-131. Removing the Roll Set Sensor
A
Roll Set Sensor
B
Sheet
Sheet
A
A
A
A
A
A
A
A
A
A
Grounding plate
Hooks
Hooks
Cable
Connector
Roll Set Sensor