FujiFilm Frontier-S DX100, Service Manual

Page: 119 / 303

119
4.5Disassembly and Assembly Procedure
DX100 Service Manual
18. Remove the two screws that secure the tube, and remove the Self Sealing Valve and
the O-ring.
D) Silver M2.5x12 Bind machine screw : two pieces
Figure 4-48. Removing the Self Sealing Valve (3)

Tighten the screw that secures the Self Sealing Valve with tightening
torque about 0.29N/m. (See
Figure 4-47 )

Before installing the
Ink Tube
, make sure the
O-ring
is attached
to it.
O-ring
Ink Tube
D
D

Attach the harness holder in the following order.
1. Mark the Ink Tube at the point right next to the screw hole on the CR
frame cover.
2. Attach one of the harness holder on the marked position.
3. Attach the other harness holder on the center of the curved part of the
sheet.
A D J U S T M E N T
R E Q U I R E D
Carry out the adjustments referring to "5.1.2 Adjustment Items and the
Order by Repaired Part" (p210) when the Self Sealing Valve is removed or
replaced.
Screw hole of the
CR frame cover
Marking
Sheet
Dent