FujiFilm Frontier-S DX100, Service Manual

Page: 48 / 303

48
3.2Diagnosing Failures by the LED Indications
DX100 Service Manual
3.2 Diagnosing Failures by the LED Indications
On: LED stays ON, Off : LED stays OFF, : LED flashes, ---: LED keeps the current status
C H E C K
P O I N T
For the meaning of each LED indication, see "1.7 Buttons /
LED" (p23) .
Error
LED
Remedy
(Blue) (Orange) Ink (Orange) (Orange) (Orange) Paper (Blue)* 4 Buzzer
*
2
Paper jam error
Off On --- --- *4
Intermittent
*
3
1. Remove paper inside of the Roll Unit
2. Reset the roll paper on the Roll Unit.
Paper end error Off On --- --- On Off
Intermittent
*
3
Install a new roll paper as Roll Unit .
No paper error Off On --- --- On Off
Intermittent
*
3
Set specified roll paper as Roll Unit .
Paper loading problem error
Off On --- --- On
Intermittent
*
3
Reset the roll paper on the Roll Unit.
Paper size error
Off On --- --- On
Intermittent
*
3
Set specified roll paper.
Skew error
Off On --- --- ---
Intermittent
*
3
Remove paper and insert it again.
Ink end error
Off On On*
1
--- --- ---
Intermittent
*
3
Replace the corresponding color’s Ink Cartridge with a new
one.
Ink cartridge not installed
error
Off On On*
1
--- --- ---
Intermittent
*
3
Replace the corresponding color’s Ink Cartridge with a new
one.
Ink cartridge CSIC Read/
Write error
Off On On*
1
--- --- ---
Intermittent
*
3
1. Reset the corresponding color’s Ink Cartridge.
2. Replace the corresponding color’s Ink Cartridge with a
new one.
3. Connect the FFC that connects the Ink Cartridge Holder
and the Main Board again.
4. Replace the Ink Cartridge Holder with a new one. (P.
175, P. 179)
Ink cartridge low level error Off On On*
1
--- --- ---
Intermittent
*
3
Replace the Ink Cartridge with a new one.
Cover open error (standby)
Off On --- --- --- --- 1 second

Close the exterior covers.

Replace the exterior cover sensor.
Cover open error
(operation)
Off On --- --- --- --- 1 second

Close the exterior covers.

Replace the exterior cover sensor.
★
★
★
★
★