Foma PushTalk SH902i, Manual

Page: 66 / 568

64
Cal
lin
g
/Recei
vi
n
g
An
y Key
A
n
sw
er
Set so that voice calls and PushTalk can be answered with
0
,
*
, and
1
to
9
.
Other than the dial keys, incoming calls can also be answered with
i
,
m
,
a
,
c
, and
$
.
Videophone call can be answered only with
s
or
i
.
Set FOMA terminal operations for when closed during a call.
For voice calls and Videophone calls, select
Hold sound (hold tone sounds), Finish call
(call ends) or Silent (call is put on hold without hold tone). For PushTalk, select Finish call
or Speaker phone (other party’s voice is heard through the speakers).
Note
Switching takes approximately five seconds. While switching, the screen on the right
appears. Switching may take more time depending on signal status.
When performing packet transmissions, disconnect packet transmission before
switching to Videophone.
Call may not be switched to Videophone and may be disconnected depending on
signal status.
Refer to P. 86 for details on switching from Videophone to voice call and receiving
calls.
Any Key Answer
Default setting
ON
Answering Calls by Pressing Any Key
1
In stand-by, press
t631
and
1
[ON].
Alternatively, select
_
(Settings)
→
Phone settings
→
Incoming settings
→
Any key answer from
Top menu.
Set when Folded
Default setting
Voice/Videophone call: Finish call
PushTalk: Speaker phone
Closing the FOMA Terminal to End/
Hold Calls
1
In stand-by, press
t67
and select a close operation.
Alternatively, select
_
(Settings)
→
Phone settings
→
Set when folded from Top menu.
Note
When set to Hold sound , hold tone plays. Hold tone can be changed (
n
P. 68). For Videophone calls,
the image set in Hold image (
n
P. 90) is sent to the other party.
When set to Silent , hold tone (
n
P. 68) does not play. For Videophone calls, if the Substitute image
(
n
P. 89) is a still picture, the still picture is sent to the other party. Chara-den is sent to the other party if set.
Open the FOMA terminal to resume the call.
If a device such as a flat-plug earphone/microphone with switch (sold separately) is connected, the call can
continue while the handset is closed, regardless of
Hold sound , Silent , or Finish call settings.
For Videophone calls, the set substitute image (
n
P. 89) is sent to the other party. Open the FOMA
terminal to send camera image to the other party. (
n
P. 88)
If the earphone/microphone is disconnected while the FOMA terminal is closed, the call is mute when set
to
Silent and Finish call , and put on hold when set to Hold sound . The call resumes when the earphone/
microphone is reconnected or the handset is opened.
For PushTalk, when Speaker phone is set, open the FOMA terminal to continue as a normal call.
Voice call,
Videophone call To set to Hold sound Press
1
→
1
.
To set to Finish Call
Press
1
→
2
.
To set to Silent
Press
1
→
3
.
PushTalk To set to Finish Call Press
2
→
1
.
To play the other party’s voice through the speakers Press
2
→
2
.
dv30̲e.book Page 64 Tuesday, November 22, 2005 3:21 PM