Foma PushTalk SH902i, Manual

Page: 392 / 568

390
＊
miniSD Memory Cards are sold separately. (
n
P. 376)
D
is
pla
y
ing/
Ed
it
in
g/M
a
na
gi
ng D
a
ta
S
en
d
in
g
an
d
Recei
vi
n
g
Data I
n
d
ivi
d
u
al
ly
J
Precautions for using the Ir exchange
function
Place on a desk or other stable location as shown
above with the Ir ports of the sending and receiving
FOMA terminals no further than 20 cm apart.
In the following circumstances, leave the Ir ports
facing each other and do not move.
When data is received, Save xxx? appears on the
receiving FOMA terminal, until Yes or No is selected.
Until data receiving/sending is completed.
Ir exchange may not function properly directly under
fluorescent lights, near other equipment using infrared
signals, or in areas of direct sunlight.
If either of the infrared ports is dirty, Ir exchange will
become difficult. Take care not to scratch the ports,
and wipe off any dirt with a soft cloth.
Terminal security code and authentication
password entry are required for sending or
receiving all data items.
For terminal security code, enter current security code
(four to eight digits) set in the FOMA terminal.
Authentication password is a password exclusively for
Ir exchange. Before starting data transfer, the sender
and receiver must enter the same user-specified four-
digit password. This password can be changed for
each Ir exchange operation.
Use Ir exchange to send/receive data
individually on the FOMA terminal.
Refer to P. 389 for details on data that can be sent and
received.
Send one data item, operating from the list screen
or details screen of data to send.
Example: When sending from phonebook
1
In phonebook list (
n
P. 119) or
details screen (
n
P. 119), select
data, press
C
, select Send Ir data
and press
t
.
Operation can be performed using Submenu
numbers. However, numbers differ depending
on the type of screen or data to be sent.
2
Set receiving FOMA terminal to
receive single data item, press
1
[Send], select Yes and press
t
.
Data sending begins.
When completed, Exchange completed
appears, and the previous screen reappears.
FOMA card phonebook data cannot be sent or
received.
Sort settings for folders are not reflected when
bookmarks are sent or received. All bookmarks are
saved in the
Bookmark folder.
When sending ToruCa by Ir exchange, it is sent
with the status before the ToruCa (details) was
received. However, details can be retrieved again
by the mail recipient.
Sending or receiving single phonebook entry
Received phonebook data is automatically added
to the smallest available memory number after
010 .
When no memory number after 010 is available,
data is added to an available memory number after
000 .
Group numbers for all entries are set to Not specified .
Receiving all phonebook entries
For Receive all, memory number, secret settings,
group names, group numbers, PushTalk numbers,
PushTalk group names, and PushTalk group
numbers are also saved.
Sending or receiving single mail message
For i-mode mail with i-
α
ppli To pasted, the pasted
information is deleted and is not sent or received.
Sending or receiving pictographs
For functions which pictographs can be saved,
pictographs can be sent and received. However,
pictographs may not appear properly on PCs and
mobile phones not supporting i-mode.
ToruCa obtained from i-mode or i-
a
ppli
Some ToruCa may not be sent as a mail
attachment, sent using Ir exchange or copied to the
miniSD Memory Card.
Note
Infrared port
30 ɋ
or less
20 cm
or less
Infrared port
Note
When Ir exchange could not be performed
properly, the following messages appear.
Authentication failed. Retry?
No response Retry?
If these messages appear, select Yes to try again.
If Ir exchange fails, move the FOMA terminals
close and try again.
Images sent by Ir exchange may deteriorate in
image quality or may have different file sizes.
Authentication Password
Sending and Receiving Data
Individually
Sending Single Data Item
<Send Ir Data>
dv30̲e.book Page 390 Tuesday, November 22, 2005 3:21 PM