Foma PushTalk SH902i, Manual

Page: 490 / 568

488
Data
Co
mmu
n
icat
io
n
AT
Co
mman
d
L
ist
*1 Stored in FOMA terminal’s memory using AT&W
commands.
*2 Not stored in FOMA terminal’s memory using
AT&W commands. Not reset with AT&F or ATZ
commands.
*3 Perform Redial with ATDN
o
or ATDL
o
.
*4 If the ATZ command is executed before the AT&W
command is used, terminal settings return to last
written memory, and prior changes are erased.
*5 Settings written into the FOMA terminal’s memory
using the AT&W command is stored as non-volatile
data when power is turned off.
J
Packet transmissions
J
64K data communications
J
Command name: +CGDCONT=
[parameter]
Overview
Sets host (APN) accessed when establishing
packet transmission.
Not stored in FOMA terminal’s memory with AT&W
commands. Not reset with AT&F or ATZ commands.
Syntax
+CGDCONT=[<cid>[,“PPP”[,“<APN>”]]]
o
Parameter description
<cid>
*
: 1 to 10
<APN>
*
: Any number
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA. The default settings are
mopera.ne.jp
for <cid>=1 and mopera.net for <cid>=3. Set cid
in 2 or 4 to 10. APN is a user-specified character
string for each connection, indicating the host.
Execution example
Command when registering host (APN) name
“abc” (for <cid>=2)
AT+CGDCONT=2,“PPP”,“abc”
o
OK
AT¥S
[M]
Displays current command and
S register settings.
*2
―
AT¥S
o
E1 Q0 V1 X4
&C1 &D2 &S0 &E1
¥V0
S000=000
S002=043
S003=013
S004=010
S005=008
S006=005
S007=060
S008=003
S010=001
S030=000
S103=001
S104=001
OK
AT¥V<n>
[M]
Selects response code type used
during connection.
*1
Only valid when the ATX<n> command
(
n
P. 486) setting is not n=0.
n=0: Does not use extended result codes
(default setting)
n=1: Uses extended result codes
AT¥V1
o
OK
AT Command Overview Parameter/Explanation
Execution
Example
Reasons for Disconnection
Value Reason
27
Host (APN) does not exist, or was incorrect.
30
Disconnected by network.
33
No packet transmission subscription.
36
Disconnected properly.
Value Reason
1
Specified number does not exist.
16
Disconnected properly.
17
Line busy.
18
Number was dialed, but no response
received within specified time.
19 Dialed number is making a call.
21 Dialed number refused incoming call.
63 Network service or option is not valid.
65 Transmission capacity not provided was
specified.
88
Dialed number of terminal with different
terminal attribute, or call was received.
Error Reports
Numerical
display
Text display Reason
10 SIM not inserted FOMA card not inserted.
15 SIM wrong A non-DoCoMo SIM (IC
card equivalent to FOMA
card) is inserted.
16 incorrect
password Password is incorrect.
100 unknown Unknown error occurred.
More on AT Commands
dv30̲e.book Page 488 Tuesday, November 22, 2005 3:21 PM