Foma PushTalk SH902i, Manual

Page: 467 / 568

465
Data
Co
mmu
n
icat
io
n
S
e
tti
n
g
s w
ith
F
O
M
A
PC
Se
tup So
ft
w
a
re
If the PC is running Windows XP or 2000
Professional, specify the users to whom rights
are granted.
Windows XP and 2000 Professional
Windows Me and 98
7
Make sure that
最適化を行う
(Optimize)
is checked
E
and click
次へ
(Next).
The W-TCP setting required for packet
transmissions is optimized. This screen does
not appear if the W-TCP setting has already
been optimized.
8
Confirm the setting information and
click
完了
(Finish).
The settings appear in a list. Check that the
settings are correct.
If
デスクトップにダイヤルアップのショートカッ
トを作成する
(Create dial-up shortcut on desktop)
is checked
E
, a shortcut is created automatically.
To change the settings, click
戻る
(Back).
9
Click OK on the
完了
(Finish) screen.
Restart the PC to enable the changes to the
settings. Click
はい
(Yes) when a message
appears prompting to restart the PC.
Sending and receiving transmissions
(
n
P. 468)
J
Selecting packet transmission from
Easy settings (with other providers)
The setting is made for high-speed packet
transmissions* at a maximum speed of 384 kbps.
* High-speed packet transmissions (
n
P. 464)
1
Follow steps 1 to 4 on P. 464.
Select
その他
(Other) for the host in step 3.
2
Enter the connection name and click
接
続先
(APN)
設定
(Host (APN) settings).
Enter a name in the
接続名
(Connection name)
field.
The following single-byte characters cannot be
entered.
¥ / :
＊
? ! < > |
For
接続先
(APN)
の選択
(Selected host
(APN)), the default setting is mopera.ne.jp as
the host (APN) for connecting to mopera.
If
発信者番号通知を行う
(Send caller ID) is
checked
E
, the caller ID is sent when
transmission is executed.
Advanced settings (TCP/IP settings)
Click
詳細情報の設定
(Advanced) and the IP
Address/Name server setting screen appears. To
enter dial-up information, such as the provider or
corporate LAN, register the necessary addresses
according to the instructions.
3
Configure the host (APN).
The default setting for the first cid is mopera.ne.jp ,
the APN used to connect to mopera. The default
setting for the third cid is
mopera.net , the APN
used to connect to mopera U.
S
Click
追加
(Add).
The Add host (APN) screen appears.
T
Properly enter the FOMA packet
transmission supported host name (APN)
for the provider in the
接続先
(APN) (Host
(APN)) field, and click OK .
The Host (APN) setting screen reappears.
Enter only single-byte alphanumeric
characters, hyphen (-) or period (.) for
接続先
(APN) (Host (APN)).
* Register up to ten cids.
4
Click OK on the
接続先
(APN)
設定
(Host (APN) settings) screen.
The screen in step 2 reappears. The host
(APN) set in step 3 appears in
接続先
(APN)
の
選択
(Selected host (APN)).
5
Check the host name (APN) in
接続
先
(APN)
の選択
(Selected host
(APN)) and click
次へ
(Next).
dv30̲e.book Page 465 Tuesday, November 22, 2005 3:21 PM