Foma PushTalk SH902i, Manual

Page: 50 / 568

48
Bef
o
re Usi
n
g
t
h
e
FOM
A
T
e
rm
ina
l
D
a
te
S
e
tt
ings
Set the date and time on the FOMA terminal. Set to automatically correct the date and time.
Date Settings
Default setting
Real-time clock/
date: ON
Setting the Date and Time
1
In stand-by, press
t34
.
Alternatively, select
_
(Settings)
→
General settings
→
Date settings from
Top menu.
2
Select Real-time clock/date , press
t
, and select ON or OFF .
Press
H
and the stand-by display reappears.
Note
Times appear in 24-hour format.
The date and time that are set are saved even if the battery pack is removed, but if the battery pack
remains removed for approximately two weeks or the battery remains empty, the settings may be reset.
When this happens, set again after charging the battery.
If the date and time are not set correctly, dates are not correctly recorded for Redial, Received calls,
Record message (voice/Videophone calls), and camera image titles/shooting date. In addition, functions
that use the clock, such as Auto power ON/OFF, Alarm, Schedule, SSL (authentication), i-
α
ppli Auto start
or starting i-
α
ppliDX cannot be used properly.
When Limit settings (
n
P. 433) is set to Enable , terminal security code is required to set date and time.
When setting reset notification for Limit settings and the date is set to the following month or later, Reset
time passed appears in stand-by.
Real-time clock/date
Time is not adjusted depending on the signal status.
Time may be off by a few seconds.
To automatically correct date
and time Select ON
→ t → i
[Complete].
To enter date and time Select OFF
→ t →
Date
→ t →
enter date
→
Time
→ t →
enter time
→ i
[Complete].
Use 24-hour format. When entering month, day and time, add 0
before numbers 1 through 9 (example: 01, 02, 03, etc.).
Alternatively, select numbers with
u
. If you make a mistake, move
the cursor using
v
and re-enter.
dv30̲e.book Page 48 Tuesday, November 22, 2005 3:21 PM