background image

454

Data

 Co

mmu

n

icat
io

n

Da
ta Co

mm

u

n

icati

o

n

FOMA  terminal communication formats fall into 
three categories: packet transmission, 64K data 
communication and data transfer.

 

FOMA terminal does not support fax transmissions.

 

FOMA terminal supports data communication with musea

sigmarion

 and sigmarion

. Update musea

 and 

sigmarion

 before using.

Refer to the DoCoMo web page for details on how to update.

 

The FOMA terminal is not compatible with Remote Wakeup.

J

Packet transmission

Charges incurred are based on the amount of data 
sent and received. When you are only connected 
to the network and are not sending or receiving 
data, no communication charges are incurred. 
Remain connected to the network, with no charge, 
and only send or receive data when necessary. 
Uses access points that are compatible with 
FOMA packet transmission, such as the DoCoMo 
Internet Connection Services “mopera U” and 
“mopera”, and sends and receives data at speeds 
up to 64 kbps and 384 kbps respectively. (A best-
effort connection is provided in which transmission 
speeds vary depending on the transmission 
environment and network traffic conditions.)
For packet transmission, connect the FOMA 
terminal to a device such as a PC and perform 
appropriate settings. Best suited for when 
sending and receiving mail text data or other 
relatively small amounts of data at high speeds.
Sending or receiving large files will lead to higher 
transmission charges.
Making voice calls while performing packet 
transmissions with a PC or other devices is 
possible. (

n

P. 412)

J

64K data communications

Charges incurred are based on the connection time. 
Uses access points that are compatible with FOMA 
64K data communications, such as the DoCoMo 
Internet Communication Services “mopera U” and 
“mopera”, or a synchronous ISDN 64K access point.
Connect the FOMA terminal to a device such as a 
PC and perform appropriate settings to use 64K 
data communications. Best suited for sending 
and receiving relatively large amounts of data, 
such as downloading Data box contents.

J

Data transfer

Transfer or exchange data using a FOMA USB 
cable (sold separately) or Ir exchange without 
charges. Send or receive data such as phonebook 
entries, sent/received messages, and bookmarks.
Use infrared communication when connecting the 
FOMA terminal to another FOMA terminal or 
mobile phone. Use either the FOMA USB cable or 
infrared communication when connecting the 
FOMA terminal to a PC.

J

Internet service provider fees

When using the Internet, usage fees are charged 
by the Internet service provider. These usage 
fees, paid to the Internet service provider, are 
separate from the FOMA service fee. Contact 
your Internet service provider for more 
information about usage fees.

Use the DoCoMo Internet Connection Services 
“mopera U” and “mopera”. Subscription to 
“mopera U” requires a charge. “mopera” requires 
no subscription and charges no monthly usage 
fee.

J

Host (Internet service provider, etc.) 
settings

Hosts for packet transmission and 64K data 
communications differ. For packet transmission, 
use a host that supports FOMA packet 
transmission, and for 64K data communications, 
use a host that supports FOMA 64K data 
communications or synchronous ISDN 64K 
communication.

 

Connecting to DoPa access points is not possible.

 

Connecting to PHS 64K/32K data communication data 
access points (such as PIAFS) is not possible.

J

User authentication

Depending on the host, user authentication (ID 
and password) may be necessary when 
connecting. In such cases, enter your ID and 
password using communication software (dial-up 
network) to connect. Your ID and password are 
provided by your host Internet service provider or 
host network administrator. Contact your host 
Internet service provider or host network 
administrator for more information.

J

Packet transmission and 64K data 
communications conditions

The following conditions are necessary for 
communication using the FOMA terminal.

 

PC must support FOMA USB cable.

 

Must be within the FOMA service area.

 

For packet transmission, access point must be 
compatible with FOMA packet transmission.

 

For 64K data communications, host must support 
FOMA 64K data communications or synchronous 
ISDN 64K communications.

However, even if above conditions are met, 
communication may not be possible due to a 
busy base station or poor signal conditions.

Data Communication

Data Communication Available from 
the FOMA Terminal

Things to Keep in Mind

Note

 

When performing packet transmission, the device 
connected to your FOMA terminal must be a JATE 
(Japan Approvals Institute for Telecommunications 
Equipment) authorized product.

dv30̲e.book  Page 454  Tuesday, November 22, 2005  3:21 PM

Summary of Contents for PushTalk SH902i

























































































































































































































































































































































































































































































































































































Reviews: