Foma PushTalk SH902i, Manual

Page: 85 / 568

83
M
a
k
ing/
R
e
c
e
iv
in
g
V
ide
o
phon
e
C
a
ll
s
Recei
v
ing
V
ideo
phon
e Call
s
When answering Videophone calls, both party’s images appear on the display.
Send a substitute image or Chara-den to the other party instead of one’s own image and answer the phone.
When receiving a Videophone call, use the flat-plug earphone/microphone with switch (sold separately)
(
n
P. 435) or use Hands-free (
n
P. 90) to talk while viewing each other’s image.
Receiving Videophone Calls
1
When a Videophone call is received, the ring tone sounds and the
picture light/called LED flashes.
When caller ID is sent, the phone number appears. If the other party’s name and
phone number are saved in the phonebook, they appear on the screen.
2
Press
s
.
The other party’s image appears in the main screen and your image taken with
the camera appears in the sub screen.
While receiving a call, press
i
[Subst img] to send a substitute image and
receive the call.
Set Chara-den as substitute image (
n
P. 89) to receive calls with Chara-den.
The default setting is ON for Hands-free Videophone so when the call starts,
Hands-free is available. When Manner mode is set, In Manner mode. Switch to
hands-free? appears. Select Yes and press
t
.
3
Press
H
after the call.
In viewer position
Receiving Videophone calls in viewer position
1
While receiving a call, press
\
for 1+ seconds.
Call is answered with the substitute image.
2
To disconnect, press
x
(shutter).
Note
Substitute image can be set in Substitute image (
n
P. 89).
When a Videophone call is received during a voice call, the Videophone call can be received depending on
the subscription status of network services such as Call Waiting. When the Videophone call is answered,
the current voice call is disconnected.
If a Videophone call is received from a 901iS series or later Videophone supported model when Voice Mail
Service is set to
Activate , after the set ringing time passes, Redial using voice call appears on the
caller’s screen and the call is disconnected. When a Videophone call is received from a pre-901iS series
model,
Connection failed appears and the call is disconnected. Answer during the set ringing time to
connect call.
Even when Call Forwarding Service is set to Activate , the Videophone call is not forwarded if the set
forwarding destination is not set to a device that supports Videophone and conforms to the 3G-324M
standard (
n
P. 78). Check forwarding destination before setting.
When a Videophone call is received while in Public mode (Drive mode), the ring tone does not sound, and
the picture light/called LED does not flash. The call will be recorded in Received calls.
When images are not received from the other party, a black screen appears.
dv30̲e.book Page 83 Tuesday, November 22, 2005 3:21 PM