Foma PushTalk SH902i, Manual

Page: 29 / 568

27
Bef
o
re Usi
n
g
t
h
e
FOM
A
T
e
rm
ina
l
Co
mp
o
n
en
t Names an
d
F
u
n
c
ti
o
n
s
To use the FOMA terminal, open it (normal position) or use it in viewer position.
When carrying, keeping the FOMA terminal closed as shown in the diagram for step 1 is recommended.
J
Normal position
J
Viewer position
To rotate the FOMA terminal display from normal position, open the display to where it stops midway (step 2
position) and then rotate it to the right 180
°
.
A sound effect is heard when the FOMA terminal display is rotated. (
n
P. 128)
How to Open the FOMA Terminal
1 2
Push the display back as far
as it will go. (Normal position)
3
Open carefully with both
hands.
1 2 3
Open carefully with both
hands.
Rotate the display 180
°
to
the right.
4 5
Flip the display forward.
Side keys are enabled.
(Viewer position)
Open the display until it stops.
Cautions when rotating
Note
When rotating the FOMA terminal display, be careful not to hit the key surface, stoppers or the terminal.
Also, do not rotate in the opposite direction or further than 180
°
. May damage the key surface, terminal or
stopper. (See “Cautions when rotating” above.)
Operations with keys other than the side keys are available when opening the FOMA terminal to normal
position or while rotating from normal position to viewer position.
Do not forcefully pull the rubber covers of the AV output and earphone/microphone terminal, miniSD
Memory Card slot and the external connector terminal. May damage the cover.
dv30̲e.book Page 27 Tuesday, November 22, 2005 3:21 PM