Foma PushTalk SH902i, Manual

Page: 435 / 568

433
Ot
he
r U
s
e
fu
l Func
tions
T
a
lk
Tim
e
/Co
s
t
Check previous or total call duration/charge
for voice calls, Videophone calls, etc.
Voice call duration, Videophone call duration and 64K
data communication duration appear for call duration.
Duration time includes calls made and received.
Call charge includes only calls made. When calls are
made to toll-free numbers, directory assistance (104),
etc.,
0YEN or
bbbbbb
YEN appears.
Call charges for switching between Videophone and
voice call appear as Last call cost ¥
○○
and V.phone
call cost ¥
○○
. Charges for calls switched multiple
times appear for each voice/Videophone call in total.
Call charge is saved on the FOMA card. If a different
FOMA card is inserted, the total call charges stored
(those calculated since December 2004) on the
currently inserted card appears.
※
Total call charges on a FOMA card cannot be
viewed on models released prior to the FOMA 901i
series. (However, total charge is saved on the
FOMA card.)
Call duration/charge that appears can be reset.
Call duration/charge is an estimate and may differ
from actual amount. Call charge does not include
consumption tax.
1
In stand-by, press
t47
.
Alternatively, select
_
(Settings)
→
NW
Services
→
Talk time/
cost from Top menu.
Call details screen
appears.
While accessing the
FOMA card,
Reading
UIM data appears.
If the information has never been reset, --/--/----
(--)--:-- appears for the reset date and time.
When total call charge is reset, the charges at
the time of resetting are saved for the reset
date and time.
Press
H
to end viewing.
Recorded previous or total call duration/cost can
be reset to
0 .
1
In stand-by, press
t47
and
press
i
[Reset].
2
Select item to reset.
The reset month and day are saved in reset date .
Sound an alarm or show a message in stand-by
when the set maximum talk cost is exceeded after
the call is ended. Show reset notification and
reset total call cost on the first of the month.
The default setting is Disable .
1
In stand-by, press
t47
, and
press
C
[Limit].
Limit settings screen appears.
2
Press
1
[Limit settings], enter
terminal security code (four to eight
digits) and press
t
.
3
Select Limit settings , press
t
and
press
1
[Enable].
4
Select Limit settings , press
t
and
enter maximum cost limit and press
t
.
Enter from 10 to 100,000 yen in 10 yen
increments.
The default setting is 3,000 yen.
Note (Related operations)
Calculating tax
The default setting for tax rate is 5% .
The amount after the decimal point is rounded off.
Example: If 120
s
[TAX] is pressed, 5Tax
appears.
Talk Time/Cost
Displaying the Call Duration/
Charge
Displaying the Call Details
Related Operations
Note
Transmission duration and charge for i-mode and
packet transmissions are not counted. Refer to
“i-mode User’s Manual” for details on checking
i-mode charge.
If previous call duration exceeds 9:59:59, the
counter restarts from 0:00.
If total call duration exceeds 999:59:59, the counter
restarts from 0:00.
Time used receiving or making a call is not
counted.
Last call cost is reset to
bbbbbb
YEN when the
power is turned off.
Resetting Call Duration/Call Cost
To reset total
call cost Press
1 →
enter PIN2 code
(four to eight digits)
→ t →
Yes
→ t
.
To reset total
call duration Press
2 →
enter terminal
security code (four to eight
digits)
→ t →
Yes
→ t
.
Setting Call Cost Limit Notice
<Limit Settings>
dv30̲e.book Page 433 Tuesday, November 22, 2005 3:21 PM