Foma PushTalk SH902i, Manual

Page: 172 / 568

R
e
je
c
t by
R
e
a
s
on of
N
on
-d
is
c
los
ur
e
170
S
ecu
ri
ty Sett
in
g
s
When caller ID is not sent, the reason of non-disclosure appears. Set handset to reject calls
depending on reason.
Calls received from a caller who is set to be rejected due to a non-disclosure reason will not be connected.
Calls of other non-disclosure reasons will be connected. Rejected callers hear a busy signal.
xx missed
call(s) appears and the reason of non-disclosure is recorded in Received calls.
It is recommended to also set Caller ID Request Service.
Reject by reason of non-disclosure cannot be set for numbers set to Accept calls.
SMS and i-mode mail are received normally.
PushTalk follows settings for this function. However, transmissions from the PushTalk site are received
regardless of this function.
When Reject unknown is also set to reject, all callers without caller ID are rejected regardless of this setting.
J
Reasons
Rejecting Calls from Specified Numbers
Default setting
OFF
1
In stand-by, press
t73
, enter terminal security code (four to
eight digits) and press
t
.
Accept/Reject calls setting screen appears.
2
Press
2
[Reject calls] and select ON or OFF .
When PIM is locked appears, phonebook PIM is locked. Disable and try again. (
n
P. 163)
Reject by Reason of Non-disclosure
Default setting
Accept all
Rejecting Calls with No Caller ID
User unset When the caller purposely withholds caller ID.
Payphone When the call is received from a payphone.
Not support When the caller cannot send caller ID, such as when the call is received from overseas or
ordinary (landline) telephones via various transfer services. (However, caller ID may still
appear depending on the company.)
1
In stand-by, press
t73
, enter terminal security code (four to
eight digits) and press
t
.
Accept/Reject calls setting screen appears.
2
Select reason and select Accept or Declined .
When Disable accept calls appears, phone number is set to be accepted. Disable and try again.
(
n
P. 168)
Note
Reject by reason of non-disclosure is prioritized when set with Public mode (Drive mode).
To set Press
1
[ON].
If phone number is not saved in the list, the save list appears. Reject
calls is set when saving to list is finished.
To disable Press
2
[OFF].
To set Reject user unset Press
4 → 1
[Accept] or
2
[Declined].
To set Reject payphone Press
5 → 1
[Accept] or
2
[Declined].
To set Reject not support Press
6 → 1
[Accept] or
2
[Declined].
dv30̲e.book Page 170 Tuesday, November 22, 2005 3:21 PM