Foma PushTalk SH902i, Manual

Page: 466 / 568

464
Data
Co
mmu
n
icat
io
n
S
e
tti
n
g
s w
ith
F
O
M
A
PC
Se
tup So
ft
w
a
re
Use this setup software to easily create a dial-up
setting for FOMA data communications.
Check that the FOMA terminal is correctly connected
to the PC before making any settings. (
n
P. 456)
1
Start the program.
Click
スタート
(Start) menu
→
プログラム
(Programs) (for Windows XP, select
すべての
プログラム
(All Programs))
→
FOMA PC
設定
ソフト
(FOMA PC Setup Software).
The screen above appears when FOMA PC
Setup Software starts.
To use the W-TCP setting icon in the task tray
Click in the task tray to start W-TCP
settings. (
n
P. 468)
J
Selecting packet transmission from
Easy settings (with mopera U or
mopera)
The setting is made for high-speed packet
transmissions* at a maximum speed of 384 kbps.
The provider uses “mopera U” or “mopera”, the
DoCoMo Internet Connection Service.
* High-speed Packet Transmissions: Charges are assessed
according to the amount of data sent or received.
Transmit data without worrying about the connection time.
Send high-speed packet transmissions at a maximum
speed of 64 kbps and receive at a maximum speed of 384
kbps (with the exception of some models in both cases). A
best-effort connection is provided in which transmission
speeds vary depending on the transmission environment
and network traffic conditions. Using packet transmissions
to browse web sites with images and sending and
receiving large volumes of data, such as downloading
data, may incur high transmission charges.
1
Start the FOMA PC Setup Software
and click
かんたん設定
(Easy
settings).
2
Select
パケット通信
(Packet
transmission) and click
次へ
(Next).
3
Select mopera U
への接続
(mopera U
connection) or mopera
への接続
(mopera
connection) and click
次へ
(Next).
mopera U is a paid service that requires
subscription. A subscription confirmation
message appears when mopera U is selected.
Using another provider (
n
P. 465)
4
Click OK on the FOMA
端末設定取得
(FOMA terminal setting acquisition)
screen.
The Host (APN) setting is acquired from the
FOMA terminal connected to the PC.
Wait until acquisition is complete.
5
Enter the connection name and
click
次へ
(Next).
Enter a name in the
接続名
(Connection name) field.
The following single-byte characters cannot be
entered.
¥ / :
＊
? ! < > |
6
Click
次へ
(Next).
User name and password are not required for
mopera U or mopera.
Setting Up Communication
Easy Settings
dv30̲e.book Page 464 Tuesday, November 22, 2005 3:21 PM