Foma PushTalk SH902i, Manual

Page: 157 / 568

155
F
ace Au
th
en
ti
cati
o
n
S
ecu
ri
ty Sett
in
g
s
3
Register face authentication image.
When
i
[Complete] is pressed when no images are registered, Register face authentication image
appears.
When registering face authentication image, face straight forward and make sure entire face is inside
viewfinder brackets. This reduces authentication failure resulting from different face positions from
when registering and authenticating. Do not move your face when shooting image.
Only sub camera can be used to register face authentication image. Press
o
(brighter) or
p
(darker) to adjust brightness. Shutter sounds when registering.
4
Press
8
[Security level] and select level.
When set to Level 3 (High) , recognition becomes more precise. Standards for recognizing the user
and others become stricter. The recognition standards for Level 2 (Middle) are between Level 3
(High) and Level 1 (Low) . When Level 1 (Low) is selected, recognition standards are low.
5
Press
i
[Complete].
This is a simple security feature that uses saved face images appears.
6
Press
t
.
Activating Face Authentication
1
In the face authentication screen, face the sub camera towards
yourself.
Press
o
(brighter) or
p
(darker) to adjust brightness.
Do not move your face while authenticating.
Authentication successful appears and function can be used.
To switch to Enter security code, press
i
[Sec code].
A message appears if authentication is not complete after three seconds. To authenticate again, select
Re-authenticate , press
t
and face the sub camera towards yourself. To enter terminal security
code, select Enter sec code , press
t
and enter terminal security code (four to eight digits).
To register new face
authentication image Enter face authentication image registration number
1
to
7
→
face sub camera towards yourself
→ t
[Add].
Register again if Unable to recognize. Register again appears.
To overwrite registered face
authentication image Enter face authentication image registration number
1
to
7 →
1
[Overwrite]
→
face sub camera towards yourself
→ t
[Add].
Register again if Unable to recognize. Register again appears.
To check registered face
authentication image Enter face authentication registration number
1
to
7 →
2
[Check saved data].
Press
t
[Agree] to end viewing.
To delete registered face
authentication image Enter face authentication registration number
1
to
7 →
2
[Check saved data]
→ i
[Delete]
→
Yes
→ t
.
To check Error history Press
9
[Error history].
Press
t
[Agree] to end viewing.
Level 3 (High) Press
1
.
Level 2 (Middle) Press
2
.
Level 1 (Low) Press
3
.
dv30̲e.book Page 155 Tuesday, November 22, 2005 3:21 PM