Foma PushTalk SH902i, Manual

Page: 500 / 568

498
T
ext
I
n
p
u
t
K
ut
e
n
C
ode
In
put
3
Move the cursor to the last
character and press
t
.
Selected text to copy is highlighted.
(The highlighted text is copied or cut.)
Press
r
for 1+ seconds to select all
characters after character selected in step 1.
Press
q
for 1+ seconds to select all
characters before character selected in step 1.
Example: When copying message text
1
Open received mail and press
C52
[Copy].
For sent mail, press
C62
[Copy] in sent
message screen.
For unsent mail, select Message in compose
message screen, press
t
and
C3
[Copy].
Proceed to step 3.
Copy selection screen appears.
2
Select item to copy.
Copy screen appears.
3
Move the cursor to the first character
to copy and press
t
[Start].
4
Move the cursor to the last character
to copy and press
t
[Copy].
Example: When pasting text into a new message
1
Open the text input screen to paste
to, move the cursor to the paste
location and press
*
for 1+
seconds.
From the menu, press
C5
[Paste], move
cursor to the paste location and press
t
[Paste].
Character string in memory is inserted.
Use four-digit kuten codes to enter kanji, hiragana,
katakana, symbol, and alphanumeric characters.
Each kuten code corresponds to a specific character.
Refer to “JIS Kuten Code List” on P. 514 to P. 517 for
details on kuten codes and the corresponding characters.
1
In text input screen, press
a
[Chara]
multiple times and
U
appears.
2
Enter four-digit kuten code.
After the fourth digit is entered, the character
appears.
Before the fourth digit is entered, press
c
to
clear the numbers when the wrong kuten code
is entered. Re-enter correct code.
Register up to 100 frequently used words with
a short keyword (up to eight double-byte
hiragana) for easy retrieval. When a keyword
is entered and converted to kanji, the
registered word appears in the candidate list
and can be easily entered.
The same keyword can be registered up to five times.
1
In stand-by, press
t321
.
Alternatively, select
_
(Settings)
→
General
settings
→
Text input setting
→
User
dictionary from Top menu.
User dictionary list appears.
Press
i
[Switch] to switch between word and
keyword lists.
2
Select Save new and press
t
.
User dictionary entry screen appears.
3
Enter word and press
t
.
Enter up to 15 double-byte characters.
Line breaks cannot be entered.
4
Enter keyword and press
t
.
Enter up to eight hiragana.
1
In stand-by, press
t321
,
select word and press
t
.
User dictionary editing screen appears.
2
Edit word and press
t
.
Copying the Contents of Mail
Address Press
1
.
The address is copied and
operation ends.
Subject Press
2
.
Message Press
3
.
Pasting Text
Note
In fields that accept only single-byte characters such
as the
Reading field in the phonebook, only single-
byte characters in memory are pasted. Depending
on the location, only the allowed number of
characters are pasted.
Text stays in memory until new text is copied/cut or
power is turned off.
Press
c
and the previous screen in step 1 of
“Pasting Text” reappears.
Kuten Code Input
Inputting Kuten Code
Register Words (User Dictionary)
Registering Frequently Used
Words
Registering a New Word
Editing Registered Words
dv30̲e.book Page 498 Tuesday, November 22, 2005 3:21 PM