Foma PushTalk SH902i, Manual

Page: 70 / 568

68
Cal
lin
g
/Recei
vi
n
g
Se
t H
o
ld
Ton
e
Set the hold tone to Hold melody 1 , Hold melody 2 or recorded voice memo for when the
other party is on hold.
The hold tone plays at the same volume as the earpiece volume.
Public mode (Drive mode) is an automatic answering service used to ensure manner in
public places. When a voice call is received, the caller hears a message indicating you are
driving or otherwise unable to speak (on the train, bus, in a movie theatre, etc.) and the call
is disconnected.
Activating/Deactivating Public mode (Drive mode) is only available when in stand-by. (Available even when
A
is showing on the screen.)
Calls can be made normally while in Public mode (Drive mode).
This function is not available during data transmissions.
Message requesting caller ID is played when User unset calls are received while Caller ID Request is set to
Activate . (Public mode (Drive mode) message is not played.)
Note
When a recorded voice memo is set as On hold tone, setting returns to default if the voice memo is
deleted.
Set Hold Tone
Default setting
Hold melody 1
Setting Hold Tone
1
In stand-by, press
t182
and select a hold tone.
Alternatively, select
_
(Settings)
→
Sound
→
Hold/On hold tone
→
Set hold
tone from Top menu.
Select Hold melody 1 or Hold melody 2 and press
i
[Play]. Press
i
[Stop] to
stop playback and the previous screen reappears.
Note
If a recorded voice memo is set as Hold tone, setting returns to default if the voice memo is deleted.
Public Mode (Drive Mode)
Using Public Mode (Drive Mode)
1
In stand-by, press
*
for 1+ seconds.
Public mode (Drive mode) is set and
_
appears.
A message stating the owner of the phone is driving or is in a place that does not allow mobile phone
use is played.
If Manner mode is also set, Public mode (Drive mode) setting is prioritized.
To set Hold melody 1 Press
1
.
To set Hold melody 2 Press
2
.
To set recorded voice memo Press
32
[Play]
→
select memo
→ i
[OK].
To set after recording voice
memo Press
31
[Record]
→
record
→ t
[Stop]
→
2
[Play]
→
select memo
→
i
[OK].
To lock voice memo PIM Press
3 → 3 →
enter terminal security code
(four to eight digits)
→ t → 1
[ON].
To disable PIM lock: Press
2
[OFF].
dv30̲e.book Page 68 Tuesday, November 22, 2005 3:21 PM