Foma PushTalk SH902i, Manual

Page: 47 / 568

45
Bef
o
re Usi
n
g
t
h
e
FOM
A
T
e
rm
ina
l
Batt
er
y
L
evel
Check the approximate battery level in the display.
Battery empty. Unsaved data will be lost. Ending current operation
appears approximately 80 seconds before battery becomes empty. (Press
t
to clear the message.) After approximately 20 seconds, an alert tone sounds.
The screen on the right appears, handset operations are disabled and power
turns off after approximately 60 seconds.
During a voice/Videophone call, the alert tone sounds, and the call is disconnected after approximately 20
seconds. At the same time, the screen above appears and after approximately 60 seconds, the power turns
off.
When
H
is pressed during a call, the call is disconnected. Turn off the power and recharge the battery.
Battery Level
How to Check the Battery Level
Note
When icons have been changed (
n
P. 144), the above icons may differ.
Checking the Battery Level with Sound and Display
1
In stand-by, press
t313
.
Alternatively, select
_
(Settings)
→
General settings
→
Check status
→
Battery level from Top
menu.
Graphic for battery level appears. (A different sound is heard for each battery level.)
The battery level sound is heard at the volume set in Keypad sound. (
n
P. 130)
Wait approximately two seconds or press
c
and the previous menu reappears.
If the Battery Runs Out
Note
Alert tone does not sound when Manner mode (
n
P. 133) or Public mode (Drive mode) (
n
P. 68) is set.
(Alert tone sounds during a call.)
"
: Battery level is still sufficient
#
: Battery level is low
$
: Battery is almost empty
%
: Battery is empty (power will turn off soon)
{
: Battery pack is being charged
Graphic
Sound Three beeps Two beeps One beep
Status Battery is sufficiently full Battery is running low Battery is almost empty
dv30̲e.book Page 45 Tuesday, November 22, 2005 3:21 PM