Foma PushTalk SH902i, Manual

Page: 48 / 568

46
Bef
o
re Usi
n
g
t
h
e
FOM
A
T
e
rm
ina
l
P
o
we
r ON/OF
F
When the power is turned on, the display backlight illuminates and it is possible to make and
receive calls (stand-by status).
Before turning the power on, check that the FOMA card is properly inserted. (
n
P. 38)
Switch display language between Japanese and English for functions, messages, and
menu items.
Power ON/OFF
Turning the Power On and Off
Turning the Power On
1
Press
H
(Power) for 2+ seconds.
The wakeup screen appears followed by the initial settings screen. Proceed to
initial settings (
n
P. 47).
If initial settings are not yet completed, the setting screen appears every time the
power is turned on.
If initial settings have been completed, the screen shown
on the right appears when power is turned on. This screen
is called the
stand-by display .
When Enter PIN code appears, enter the PIN code
(
n
P. 156).
Note
If the FOMA card is not inserted, Insert UIM and a FOMA card error appears. (
n
P. 30)
Turning the Power Off
1
Press
H
(Power) for 2+ seconds.
It may take some time for the power to turn off. (The end screen appears on the display until the power
turns off.)
Note
Before connecting to an external device, make sure that all transmissions are complete and then turn off
the FOMA terminal.
Select Language
Default setting
日本語
Switching Display to English
1
In stand-by, press
t35
and select display method.
Japanese display
English display
Alternatively, select
_
(Settings)
→
General settings
→
Select language from
Top menu.
Note
If a FOMA card is inserted, settings are saved to the card.
Japanese display Press
1
.
English display Press
2
.
dv30̲e.book Page 46 Tuesday, November 22, 2005 3:21 PM