Foma PushTalk SH902i, Manual

Page: 547 / 568

545
Ap
p
e
n
d
ix
/U
si
n
g
w
ith
Extern
al
Devi
ces/
T
ro
u
b
lesh
o
o
ti
n
g
S
can
n
in
g
Fu
nc
tion
Set auto-update to Enable to automatically update pattern definitions when a new version
becomes available.
When auto-update is successful, a message stating so appears. Auto-update is not performed
depending on the status of the FOMA terminal. In such cases, a message stating that pattern
definitions have been updated appears.
J
Displaying detected errors
Note
When updating pattern definitions, information about the handset (model and serial number) is
automatically sent to the server (DoCoMo scan function server). Sent information is only used for pattern
definition update.
Correctly set the FOMA terminal date (year/month/day) beforehand.
Download may be interrupted if signal is weak.
Updating Pattern Definitions Automatically
<Set Auto-update>
1
In stand-by, press
t372
, select Enable and press
t
.
Alternatively, select
_
(Settings)
→
General settings
→
Scanning function
→
Set auto-update from Top menu.
2
Select Yes and press
t
.
3
Select Yes and press
t
.
4
Press
t
[Agree].
Note
Information regarding Enable/Disable for Set auto-update is saved on the network. Therefore, Enable is
always selected on the FOMA terminal when setting.
When setting auto-update, information about the handset (model and serial number) is automatically sent
to the server (DoCoMo scan function server). Sent information is only used for pattern definition update.
Download may be interrupted if signal is weak.
Displaying Scanned Results
After scanning, detected errors are ordered by severity in the scanned results screen.
Up to five error names appear. Etc appears below the fifth error name when more than
six are detected. If same error is detected more than once, it is only listed once.
dv30̲e.book Page 545 Tuesday, November 22, 2005 3:21 PM