Flyer Goroc 3, Translation Of The Original Instruction Manual

Page: 201 / 252

48
2. Using any parts other than the original
ones will immediately cause the man-
ufacturer’s liability for material defects
and/ or the manufacturer’s warranty
service to become void. There is also
an increased risk of accidents or falls.
3. The safe functioning of your FLYER
can only be guaranteed with regular
maintenance. Maintenance work may
only be performed by FLYER special-
ist retailers.
Monthly – FLYER driver
Check that all screws, nuts, quick release axles
and quick release fasteners are firmly attached
Every year or after every 1000 km, whichever
occurs first
FLYER specialist retailer
• Lubrication of all moving parts for which lubri-
cation is intended (excluding brake surfaces)
• Visual inspection of the frame and of
components for cracks and damage
• Mend paint damage
• Replace parts with rust spots
• Treat all bare metal parts (excluding brake sur -
faces) against corrosion (rust)
• Change defective or damaged parts
• Check the wheels and centre them as required
• Check the tension of the spokes
• Check and clean the chain/sprocket/cogset
• Lubricate the chain with a suitable lubricant
• Check the rim for wear
• Check the brake pads for wear
• Check that all screws, nuts, quick release axles
and quick release fasteners are firmly attached
• Check the brake system and quick release ax -
les and adjust it or replace parts if necessary
• Check the gear system and adjust or replace
parts of it if necessary
• Check the hubs
• Check the headset
• Check the pedals
1. Only use cleaning agents and lu-
bricants that are recommended or
approved by the component manu-
facturer.
2. Please note that not all lubricants and
care products are suitable for your
FLYER. By using unsuitable lubri-
cants or care products, you can dam-
age or impact the functionality of your
FLYER e-bike.
Ensure that the brake pads, brake discs
and brake surfaces are not exposed to
cleaning or servicing fluids or oils, as this
reduces the performance of the brakes.
23.1 Maintenance work and ex-
change of wearing parts
1. Components to be changed may only
be replaced with identical, original
parts. Wearing parts may only be
replaced with identical, original com-
ponents.