Flyer Goroc 3, Translation Of The Original Instruction Manual

Page: 197 / 252

44
20. Accessories and
equipment
Appropriate installation of accessories and check-
ing their compatibility with the FLYER are the re-
sponsibility of the cyclist/buyer. Only accessories
listed in the FLYER catalogue are approved for
use with the FLYER by FLYER AG. Check the rele-
vant accessories for compatibility with your FLYER
model and consider their technical specifications
(e.g. maximum load, installation instructions, etc.).
Always install accessories according to
the regulations and instructions.
• Only use add-on parts that comply
with the respective legal regulations
and road traffic regulations.
• The use of unauthorised accessories
may lead to accidents, severe falls
and damage. You should therefore
only use original accessories and
add-on parts which fit your FLYER .
The warranty and/ or guarantee can
become void if unapproved accessories
are used. FLYER AG cannot be held li-
able in connection with the use of unau-
thorised accessories.
1. Some FLYER E-MTBs are supplied
without a kickstand. When park-
ing your FLYER, always ensure it is
propped up securely. In the event of
an accident, the E-MTB or some of
its important components might be
damaged. The electrical system and
the battery in particular must not be
exposed to impact.
2. The installation of accessories might
damage the paint work.
3. The frame, battery or components
may not be changed and no holes
may be drilled into them in order to
attach accessories.
20.1 Riding with additional load
Luggage carrier | riding with luggage
FLYER E-MTBs are generally not approved for
use with luggage racks. As an exception, certain
models have a specially adapted FLYER luggage
rack.
20.2 Carrying children
The safe transport of children is the responsibility
of the cyclist. FLYER AG cannot be held liable in
connection with the transport of children and the
may never be exceeded. Never attach a luggage
rack to the seat post, as the latter is not designed
for this purpose. This could result in part failure
and serious falls. The manufacturer’s warranty
will also expire in this case.
Make sure that your luggage is firmly
and safely attached when transporting
packing bags or other loads. Ensure that
no parts can get hooked in the spokes or
the turning wheels.
19. Mudguard
The mudguard is fitted with a safety fastening in
case an object jams between the mudguard and
the tyre. This releases the mudguard from its
holder to prevent a fall.
You must stop riding immediately if a foreign body
is trapped between the tyre and the mudguard.
Remove the foreign object before beginning to
riding again. Otherwise, there is a risk of a fall and
serious injuries.
You may under no circumstances drive
with a loose mudguard strut, as the strut
may jam in the wheel and block it. The
loose ends of the holders may lead to
serious accidents.
Damaged mudguards must be replaced by a
FLYER specialist retailer before riding again. You
should also regularly check whether the braces
are fixed securely in the safety releases.