Flyer Goroc 3, Translation Of The Original Instruction Manual

Page: 162 / 252

9
EN
6
5
f
g h
1
a
i
b
d e
c
2
3
7
8
4
3
9
5. FLYER with Bosch
motor
5.1 Operation the e-bike with
Inutiva on-board computer
1. “i” display function button
2. Lighting button
3. On-board computer
4. On-board computer holder
5. On-off button for the on-board computer
6. “RESET” button
7. USB socket
8. USB protective cover
9. Drive unit
On-board computer display elements
a Motor power indicator
b Support level indicator
c Lighting display
d Text display
e Values display
f Tachometer display
g Gear Recommendation: the higher gear
h Gear Recommendation: the lower gear
i Battery charge status indicator
You have the following options for switching on
the E-bike system:
• The E-bike system is automatically switched
on if the controls are on and inside their holder.
• Briefly press the controls’ on/off button 5 once
the controls and the battery have been inserted.
• Press the battery on/off button once the on-
board computer have been inserted.
You have the following options for
switching off
the E-bike system:
• Press the on-board computer on/off button 5 .
• Switch off the battery using its on/off switch
(see operating instructions of the battery).
• Remove the controls from their holder.
Switching the on-board computer on/off
Briefly press the on/off button
5
to
switch on
the on-board computer. The controls can also
be switched on when they have not yet been in-
serted into the holder (if the battery is sufficiently
charged).
Press the on/off button 5 to switch off the on-
board computer.
For about 10 minutes, neither move the FLYER
nor push any buttons on the on-board computer.
The E-bike system will automatically turn off to
save energy.