Flyer Goroc 3, Translation Of The Original Instruction Manual

Page: 159 / 252

6
1. Foreword
Dear FLYER customer
Thank you for choosing a FLYER. Enjoy your
journey of discovery on your FLYER and have
a safe ride.
Thank you for your trust in our product.
Your FLYER Team
2. Definition of terms
These original operating instructions contain the
most important information required to familiarise
yourself with your new FLYER, to get to know its
technology, to attend to safety aspects and pre-
vent damage to persons, goods and the environ-
ment. You should therefore keep this manual in a
safe place, always have it to hand and observe
the pointers provided in this manual which have
proven to be helpful when using this FLYER.
Please provide these instructions with the FLYER
when you lend your FLYER to other persons. You
are strongly advised to carefully read the attached
instructions manual to the electric drive system
before you use your bike for the first time. The
following symbols are repeatedly shown on the
pages below:
DANGER: There is a risk of personal in-
jury.
NOTE: Here you can find important in -
formation which will help you get the
most out of your FLYER e-bike.
WARNING: This is an indication of pos-
sible damage to property or the environ-
ment.
OBSERVE PRESCRIBED TORQUE:
Screw connections must be tightened
with a specific fastening torque. This is
only possible with a special tool called a
torque spanner. Have this work per-
formed by your FLYER specialist retailer
if you do not have the right tools or spe-
cialised knowledge. Parts which have
been fitted with the incorrect torque may
break or fall off, which can lead to seri -
ous falls. The correct fastening torque is
either imprinted on the component or
listed in the technical data.
These symbols will be displayed from now on
without any further explanation, however they
still represent the content and hazards explained
above. Carefully read all the instructions.
3. Safety information
It is essential that you per-
form the tests and inspec-
tions stipulated. Negligence
is a great danger, especially
in this area. Protect yourself
and other road traffic partic -
ipants by behaving safely
and responsibly and always
considering the dangers to
which you are subject as a
cyclist amid road traffic. Al -
ways wear a well-fitting and suitable helmet. Ask
your FLYER specialist retailer how to fit your hel -
met correctly so that it protects you properly.
If you are participate in more
extreme bike sports, it is essential that
you wear protectors for your own safety.
These original operating instructions do
not instruct on how to assemble a
FLYER from individual parts, how to re-
pair it or how to get partially assembled
FLYERS ready to operate.
The FLYER is fitted with highly complex,
modern technology. It must be handled
with specialised knowledge, experience
and the specialised tools required. Only
allow your FLYER specialist retailer to
perform work on your FLYER. We are
therefore only able to discuss the most
important aspects in this operating man-
ual. In addition, there are also notes and
instructions from the respective manu-
facturers of the individual components
used on the bicycle. These must also be
considered. The same applies here: If
anything is unclear, do not hesitate to
ask your FLYER specialist retailer.
Being seen on the road is just as important as
being able to see. Therefore, always wear bright
clothing or clothing with reflective elements when