Fluke 9100 Series, User Handbook Manual

Page: 15 / 274

Section 6: 9100 System Operation — SCPI Language 6-9
Final Width = 215mm
1. When you enter your password using
the alpha-numeric keyboard, security
icons will appear on the screen as you
type. Finally press the
↵
(return) key.
If the password is incorrect: an error
message will be given and the security
icons will be removed, enabling a new
attempt to enter the password.
The 'EXIT' screen key acts to escape,
back to the previous screen.
2. The correct password, followed by
↵
,
will provide entry to the main
'Configuration' menu screen, which
shows the present settings of the
parameters which can be changed using
screen keys on this display:
3. In this case we are interested in 'BUS
ADDRESS'.
6.4.1.5 Change the Bus Address
1. For access from the 'Present Settings'
screen, press the BUS ADDRESS
screen key on the right. This action will
transfer to the 'Change the address'
screen:
The 9100 IEEE-488 bus address can be set
to any number within the range 0 to 30.
2. Use Digit edit or Direct edit to set the
required bus address number. If using
Direct edit, after typing the number
press the
↵
key.
3. Press EXIT to return to the 'Present
Settings' screen.
6.4.1.4 Enter Your Password
Note: Address Recognition
With an address selected in the range 0
to 30; control may be manual, or remote
as part of a system on the Bus. The
address must be the same as that used
in the controller program to activate
the 9100. The 9100 is always aware of
its stored address, responding to Talk
or Listen commands from the controller
at that address. When the address is
changed by the user, the 9100
recognizes its new address and ignores
its old address, as soon as it is stored by
the user pressing the
EXIT key in the
Configuration — Bus Address menu.
TODAYS DATE TIME
For Configuration
Password Entry
E X I T
Enter password :
TODAYS DATE TIME
Configuration
Present Settings:
Language English
Power-up mode Manual
Bus Address 1
Printer NONE
Results Card Disabled
Safety Voltage . V
Border Line 7 . %
Scope option Option 600
Crystal option High acc
Ser. No. XXXXXX Rev. XXX
S E L E C T
L A N G
P O W E R
U P M O D E
B U S
A D D R E S S
R E S U L T S
C A R D
P R I N T E R
V O L T A G E
L I M I T
D A T E
T I M E
B O R D E R
L I N E
M O R E
C L E A R
U S E R
L I S T
TODAYS DATE TIME
Configuration
Change the address by using
digit or direct editing.
Bus address =
22
E X I T