Festo SBO***-Q Series, Manual

Page: 97 / 256

4. Commissioning
4-35
Festo P.BE-SBO-Q-EN en 1602e
Configuration of the image-based trigger
Requirements:
– Device is in the “Free run” evaluation mode
– “Image-based trigger” system parameter is switched on.
The following image shows the “Live image” CheckKon
window, in which you can make additional settings for the
image-based trigger.
Fig. 4/10: “Live image” CheckKon window
Trigger field area Evaluation of the image-based trigger is made only for one
image area within the field of view of the camera image. This
so-called “trigger field area” can be set easily in the “Live
image” window (similar to the field of view).
Move the mouse to the node points of the “trigger field
area”. With pressed (left) mouse button, change the
position and size of the frame.
Alternatively, actuate the slide control to set the upper,
lower, left and right trigger field limit.