Festo SBO***-Q Series, Manual

Page: 156 / 256

4. Commissioning
4-94
Festo P.BE-SBO-Q-EN en 1602e
Enter slave features manually
When an EDS file is installed, the following information about
the EtherNet/IP slave is added to the EDS library.
Basic information Value Description
Vendor name Festo Manufacturer
Vendor ID 26 Manufacturer ID
Device Type 0 Generic device
Product code 21314 Product code
Major version/Minor version 3.5 Version/revision
Input size/output size 32 bit/16 bit Size of the cyclically transmitted I/O data
Device Type SBOx Q Device type
Extended Ethernet/IP
slave features Value Description
Request Packet Interval (RPI) 15 ms Minimum cycle time
Exclusive Owner connections 1 Number of direct connections permitted.
(Only one controller may connect with the
device.)
Input only connections 0 (not supported) Used for devices without outputs – not
relevant here.
Listen only connections 3 Requires an existing “Exclusive Owner
connection”. Up to three devices can “listen”,
e.g. for purposes of visualisation on a display.