Festo SBO***-Q Series, Manual

Page: 135 / 256

4. Commissioning
4-73
Festo P.BE-SBO-Q-EN en 1602e
RSTR – Read String RSTR <address>
Outputs the current character string of a string address
(
è
appendix A.6.11). Only one string address can be read
out per command. Simultaneous reading of multiple charac­
ter strings is not possible.
Commas, apostrophes and control characters contained in
the strings are replaced by “_” characters.
RDO – Read Data Output RDO [name of data output]
RDO “name of data output”
Outputs the values of the respective data output.
Note
Data outputs can only be requested if they have been
created previously in CheckOpti in the selected check
program with the corresponding name.
If no data output has been created, an error message
appears.
Details of configuration of a data output can be found in
the CheckOpti online Help.
Values are output only if the data output name has been
entered completely and correctly.
Do
not
use any of the following characters in data out­
put names:
– square brackets [ ]
– quotation marks “ ”
– umlauts
– special characters.
Use correct capitalisation in data output names.