Festo SBO***-Q Series, Manual

Page: 120 / 256

4. Commissioning
4-58
Festo P.BE-SBO-Q-EN en 1602e
Commissioning:
Note
In order for the Compact Vision System to be recognised in
the CP line when the power supply for the CP master is
switched on (e.g. of a CPX-CP interface), the Compact
Vision System must already be ready for operation.
Switch on the power supply for the Compact Vision
System at least 15 seconds before the power supply for
the CP master.
1. Make a connection to the device with the CheckKon
program and set the system parameter “Function at
CAN interface” to “Off ”.
End the CheckKon program.
2. Switch the system off in order to avoid faults or damage.
Disconnect the power supply for the device and the CPX
terminal.
3. Attach the Compact Vision System to the desired CP line.
4. Connect the power supply for the device.
5. Make a connection to the device with the CheckKon
program and set the system parameter “Function at
CAN interface” to “CPI module”.
6. Set the system parameter “SBO...-Q connected to line X2
or X4” to “No” if the Compact Vision System is connected
to the CP line X1 or X3. If connected to the CP line x2 or
x4, the system parameter must be set to “Yes”.
7. First connect the power supply to the CPX-CP terminal.
8. Actuate the Save button on the CPX-CP terminal to save
the new line assignment.