Festo SBO***-Q Series, Manual

Page: 130 / 256

4. Commissioning
4-68
Festo P.BE-SBO-Q-EN en 1602e
5. Specify the IP address and the Telnet port of the Compact
Vision System at the device to be connected.
6. Program the device to be connected to enable it to access
Compact Vision System data.
Please consult your local Festo service when using the
S7 SBOxQ building block.
General information on inputs can be found in chapter 4.10.1.
The available memory addresses and their function can be
found in appendix A.6.
Test of Telnet communication
Most PC operating systems have a Telnet program at
command line level. With this program, you can use the Telnet
connection to the Compact Vision System.
Windows operating system
Requirement in
operating systems
from Windows Vista Activate the option “Telnet Client”.
This setting can be found in “Windows functions ...”
under “Programs and Functions” in the system control.
Open a window with command line via the Windows Start
Menu [Programs] [Accessories] [Entry].
Start the Telnet program and pass on the IP address of
the Compact Vision System as well as the port number
determined in the “TCP port” system parameter.