Festo SBO***-Q Series, Manual

Page: 151 / 256

4. Commissioning
4-89
Festo P.BE-SBO-Q-EN en 1602e
IMAGE Image evaluation
The IMAGE command is only allowed in the “Triggered” and
“Free run” evaluation modes. The command performs a com­
plete evaluation. The inspection results and features are
thereby entered in the corresponding flagword and string
addresses.
CHANGEPRG Change check program
This command allows the check program to be changed. The
values 1 to 256 are permitted as check program numbers.
Requirements:
– The system parameter “Check program preselection”
is configured to “I/O possibilities”. Otherwise, you will
receive an error message.
– The device is ready for operation:
Output “Ready for Operation” = logic 1.
EXIT Terminate connection
The Compact Vision System terminates the Telnet XML
connection.
VERSION Requests the version of the Telnet XML server and of the
device.
Messages and error messages (
è
Tab. 4/10).