Festo SBO***-Q Series, Manual

Page: 123 / 256

4. Commissioning
4-61
Festo P.BE-SBO-Q-EN en 1602e
Note
The input and output numbers specified here must be con­
verted according to the above address assignment for the
corresponding CP line number and line assignment.
6 CP inputs (from the viewpoint of the device, these are
outputs)
Input Function
Bit I0 Ready for operation
Bit I1 Output result good
Bit I2 Output result reject
Bit I3 Output result correctly oriented
Bit I4 Output result incorrectly oriented
Bit I5 Unused
Bit I6 Warning (corresponds to “LED C” red & flashing)
Bit I7 Fault status (corresponds to “LED C” red)
Bit I8 ... 11 (counts as a byte)
Recognised parts type (0..15): “0” = Parts type 1
Bit I12 ... 15 Unused
Tab. 4/8: CP inputs
16 CP outputs (from the viewpoint of the device, these are
inputs)
Output Function
Bit O0 Trigger signal
Bit O1 Apply Inputs signal
Bit O2 Acknowledge Error signal