Festo SBO***-Q Series, Manual

Page: 30 / 256

1. System overview
1-12
Festo P.BE-SBO-Q-EN en 1602e
1.3 Software packages
The software packages CheckKon, CheckOpti and
SBO-DeviceManager are used for commissioning and
handling inspection tasks. They can run under the operating
systems Windows 2000, XP, Vista and Windows 7 and offer
a convenient user interface.
The minimum requirements your PC must meet for use of
these software packages can be found in the respective soft­
ware packages Help.
CheckKon provides the following functions:
Theme Function
Configuration and
commissioning – Defining the signal behaviour
– Defining the frame rate, sensor amplification
– Defining the evaluation and output functions
Analysis – Display of evaluated parts, live images,
statistics and handling of check programs
Diagnosis – Display of the device properties
– Display of errors
Service – Documentation of a system
Tab. 1/5: Functions of CheckKon
CheckOpti permits creation of check programs.
SBO-DeviceManager provides the following functions:
– Changing the network settings of the device
(IP address, gateway, password, etc.).
– Transfer of firmware to the device.
– Transfer of software add-ins to the device.