Festo SBO***-Q Series, Manual

Page: 196 / 256

A. Technical appendix
A-14
Festo P.BE-SBO-Q-EN en 1602e
A.6 Address table for EasyIP, Modbus, Telnet and CoDeSys embedded
Read and/or write access to the following entries is possible
via EasyIP, Modbus, Telnet and the integrated PLC run-time
system CoDeSys.
The entries have the access type “Flag word” (FW) or “String”
(STR).
Note
Depending on the programming environment, “Flag word”
(FW) may also be labelled “Merkerwort” (German for “flag
word”).
A.6.1 Input register
Name Read/
write FW Value
type Permitted
values Remarks
Trigger signal R/W 0 uint16 0 or 1
Apply Inputs signal R/W 1 uint16 0 or 1
Acknowledge Error signal R/W 2 uint16 0 or 1
not used 3 uint16
not used 4 uint16
not used 5 uint16
not used 6 uint16
not used 7 uint16
Check program preselection bit 0 R/W 8 uint16 0 or 1 Application of the
preselected check
program through
setting of Apply
Inputs signal.
Check program preselection bit 1 R/W 9 uint16 0 or 1
Check program preselection bit 2 R/W 10 uint16 0 or 1
Check program preselection bit 3 R/W 11 uint16 0 or 1