Festo SBO***-Q Series, Manual

Page: 137 / 256

4. Commissioning
4-75
Festo P.BE-SBO-Q-EN en 1602e
Messages and error descriptions
Code Message/Error Description
24 AUTH enter password – Request for entry of the password after
transmission of a user name.
Use the command “PASS”
23 AUTH access denied – Message after failed authentication attempt.
22 AUTH access granted – Message after successful authentication
attempt.
21 SBOx-Q-ZEWAS authentication required – Initial message of the server if authentication is
necessary.
20 SBOx-Q-ZEWAS no authentication
required – Initial message of the server after a connection
is built up if no authentication is required.
1 OK operation successful – Command successfully executed.
–1
1)
ERROR parse error,
or command unknown – Command invalid.
– Error in the instruction.
–5 ERROR another client is already
connected – Message with existing connection.
–6 ERROR maximum number of
connections reached – Warning if an attempt is made to set up more
than 10 connections.
–10 ERROR camera not ready – Compact Vision System not ready for action
when the command is executed.
–11 ERROR timeout during last
operation – Timeout when executing the command.
–12 ERROR response line overflow – The response line exceeds the valid number of
characters.
–20 ERROR program switch failed – Check program could not be switched.
–21 ERROR program number not
valid – Specified check program number is not valid.
1)
up to firmware 3.4x: code = 0; firmware 3.5 or higher: code = 1