
4. Commissioning
4-62
Festo P.BE-SBO-Q-EN en 1602e
Output
Function
Bit O3 ... 7
Unused
Bit O8 ... 15
Preselection check program
(is read after bit O1=1)
Tab. 4/9:
CP outputs
Assignment of the devices addresses depends on:
a) the CPX fieldbus node used or CPX-FEC
b) the line number used
c) the CP modules used in the line in front of the device.
Example:
The device is operated on a CPX-CP interface with a
CPX-FB13 Profibus fieldbus node. The device is located in the
1st line in position 2 after a CP-A04-M12-CL output module
(
è
Address assignment for the CPX-CP interface
:
Inputs (string 1: I0 ... I31):
–
I0
...
I15 is assigned to the devices 16 inputs
–
I16 ... I31 free
Outputs (string 1: O0 ... O31).:
–
O0 ... O7 is assigned to CP-A04-M12 -CL
(8 assigned outputs, of which 4 are used)
–
O8 ... O23 is assigned to the devices 16 outputs
–
O24 ... O31 free
The address O8 thus corresponds to the trigger signal.
Information on the process and signal sequence can be found
in chapter 4.9 ff.
Summary of Contents for SBO***-Q Series
