Festo SBO***-Q Series, Manual

Page: 221 / 256

A. Technical appendix
A-39
Festo P.BE-SBO-Q-EN en 1602e
System parameters
Object class: 10 8
Instances: 1
Attributes
Attr. no. Access Description Type Permitted
values Remarks
Offset address
(flag word) Get/Set System parameter
“…” UINT
è
dynamic help in
the “System para­
meters” window in
CheckKon
Features – results of the last check
Object class: 10 9
Instances: 256
Addressing of the features values is summarised in blocks.
The blocks begin at instance no. 1 and end at instance
no. 256. Thus:
– the 1st block of feature values starts at instance no. 1
– the 2nd block of feature values starts at instance no. 2
– etc.
In total there can be up to 256 feature blocks, corresponding
to the 256 instance numbers. The number of features actually
used can be found under the basic results of the last check
(object class = 106, instance no. = 1, attribute no. 18 )
(
è
table in the chapter “Basic results of the last check”).