Festo SBO***-Q Series, Manual

Page: 76 / 256

4. Commissioning
4-14
Festo P.BE-SBO-Q-EN en 1602e
4.6 CheckKon connection to the Compact Vision System
Note
Switch the device to Stop status.
This is a prerequisite for connecting, disconnecting and
making changes to the device.
CheckKon is used for the further commissioning of the
Compact Vision System. Carry out the following steps:
1. Connect the Compact Vision System via the Ethernet
interface to your PC or hub/switch. Follow the instructions
in chapter 3.
2. Start CheckKon by double-clicking on the corresponding
symbol on the Windows desktop,
or for standard installation:
In the Windows menu [Start], select the entry [Festo
Software] – [Festo CheckKon].
The program starts and opens the dialogue window
“Welcome to CheckKon” (start dialogue). This dialogue
window is used to configure the connection to the Compact
Vision System.
3. From the “Connection ...” possibilities offered, choose
the entry “via Ethernet”. Confirm this selection with the
mouse; click on “Continue
,
”.
4. Enter the IP network address in the following dialogue
(factory setting: 192.168.2.10). Confirm this entry by
clicking on “Continue
,
” or click on “Search...” to find
and select reachable devices.
A connection is set up between the PC and the Compact
Vision System.