Festo SBO***-Q Series, Manual

Page: 172 / 256

4. Commissioning
4-110
Festo P.BE-SBO-Q-EN en 1602e
4.11 Creation of the check programs
Check programs define how parts are to be checked, and in
particular what features of a check part are to be calculated
(e.g. length of check part) and what values are permissible for
a good part.
The check program to be used is determined via the check
program preselection. It can be selected via:
– System parameters
– I/O options.
Check programs located on the device can be updated using
the following system parameters in the section System Oper­
ating Modes Teach Mode.
– Teach mode
– Parts type
– Parts orientation.
Update of a check program becomes necessary as soon as
system parameters that have an influence on image creation
and image processing are changed. These include, in par­
ticular, system parameters in the sections
– Evaluation
– Lighting
– Camera image and pre-processing.
Information on updating check programs and for setting the
system parameters can be found in the parameter help in the
“System parameters” window of the CheckKon software
package.