Festo SBO***-Q Series, Manual

Page: 170 / 256

4. Commissioning
4-108
Festo P.BE-SBO-Q-EN en 1602e
The display interval can be set in the Web browser between
0.5 and 3 seconds. The display is updated accordingly. The
results and the camera image of the last inspection are
thereby displayed.
Note
For inspections with cycletimes below the set display inter­
val, not all results and images can be displayed in the Web­
Viewer.
Commissioning:
1. Set up a connection to the Compact Vision System using
the CheckKon program.
2. Select a setting from the following table for the
“WebViewer” system parameter in the section “Ethernet
interface”:
Setting Output
On (all results) All features calculated by the Compact
Vision System
On (results from data
output HTTP –
WebViewer) All features configured in the data
output HTTP – Webviewer using
CheckOpti
Note
For each check program, only one data output of type
“HTTP – WebViewer” is possible.
If you have not configured a “HTTP – WebViewer” type
data output, you will not receive any feature results.