Festo SBO***-Q Series, Manual

Page: 138 / 256

4. Commissioning
4-76
Festo P.BE-SBO-Q-EN en 1602e
Code Description Message/Error
–30 ERROR read offset not valid – One or more of the specified flagword
addresses is invalid for read access.
–40 ERROR write offset not valid – Specified flagword address is invalid for write
access.
–50 ERROR string offset not valid – String address not valid.
–55 ERROR one or more feature
name(s) not valid – One or more name(s) in the RNV (Read Name
Value) command are invalid.
–56 ERROR read data output – Miscellaneous) data output error.
–58 ERROR read data output:
name not defined – Data output not set up for name specified.
–59 ERROR read data output: data
output not compatible – Data output not suitable for output via Telnet or
to the CoDeSys module.
–61 ERROR no authentication
required – No authentication required (after use of the
control commands USER or PASS).
–62 ERROR already authenticated – No authentication required (after use of the
control commands USER or PASS).
–63 ERROR no user provided – The command PASS was received before
transmission of a user name.
-200 ERROR unspecified error – Error not further described.
Tab. 4/10: Messages and error descriptions