manualshive.com logo in svg

EXFO MAX-800 Series, User Manual

The EXFO MAX-800 Series is a versatile testing solution for fiber optic networks. Ensure smooth operations with the comprehensive User Manual, available for free download from manualshive.com. This manual provides detailed instructions for optimal performance and troubleshooting, making it an essential tool for users of the MAX-800 Series.

Share
Download
background image

Index

476

MAX-800 Series

LP-UNEQ............................................ 120, 248
LTC ............................................................ 230

M

M0 .................................................... 347, 349
M1 .................................................... 347, 349
MAC Address............................................. 134
MAC/IP/UDP............................................... 121
maintenance

front panel .......................................... 407
general information............................. 407

Manual.............................................. 114, 254
Manual Loopback Status........................... 293
Manual Mapping....................................... 316
Manual Skew............................................. 317
Margin ...................................................... 147
Matching & Swapping............................... 181
Max Hop Count......................................... 359
Max Jitter .................................................. 160
Max Latency ...................................... 160, 292
Max Rate ................................................... 254
Max Round Trip Time ................................ 361
Max Round-Trip Latency............................ 160
Max RX Power ................................... 116, 162
Max RX Rate.............................................. 292
Max TX Rate .............................................. 188
Max. Jitter ................................................. 292
Max. Negative Offset......................... 107, 166
Max. Offset ............................................... 119
Max. Positive Offset........................... 107, 166
Max. Rate .......................................... 143, 146
Maximum.................................................. 204
Measure Delay button............................... 373
Metrics ...................................................... 276
MFAS................................................. 237, 338
Min Round Trip Time................................. 361
Min RX Power ................................... 116, 161
Minimum .................................................. 204
Mismatch ’0’ ............................................. 208
Mismatch ’1’ ............................................. 208
Mixed ........................................................ 122

Mode................................. 181, 254, 331, 372
Modify DS0................................................ 169
Modify E0.................................................. 169
Modify Frame Structure............................. 122
Modify Loop Codes ........................... 172, 174
Modify Structure ......................................... 62

Ethernet Test Applications ..................... 72
Transport Test Applications.................... 65

Modify Structure button.............................. 65
MON............................................................ 89
Monetary Cost........................................... 132
MPLS ................................................. 126, 263
MPLS Label ................................................ 123
MS............................................................. 239
MS-AIS....................................................... 239
MSIM Monitoring ...................................... 232
MS-RDI ...................................................... 240
MS-REI....................................................... 240
MS-REI Computation Method.................... 178
Multicast ................................................... 303

N

N1 ............................................................. 353
N2 ............................................................. 355
n-Burst....................................................... 188
NDF ........................................................... 371
Near-End ................................................... 267
Negative .................................................... 119
Network .................................................... 134
Network block ............................................. 61
Network Layer ........................................... 122
New Data Flag ........................................... 363
New Pointer............................................... 363
n-Frame ..................................................... 188
NI/CSU Emulation ........................................ 41
NJ0 ............................................................ 342
No Defect Time............................................ 83
No NDF...................................................... 371
No Pattern Analysis (Live) ...................... 78, 93
No Traffic................................................... 208
No Traffic Time ............................................ 94

Summary of Contents for MAX-800 Series
















































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MAX-800 Series

WAGER 7500 Manual preview
7500
Brand: WAGER Pages: 36
Xsens DOT Quick Setup Manual preview
DOT
Brand: Xsens Pages: 4
Eastron SDM120 Series Manual preview
SDM120 Series
Brand: Eastron Pages: 2
EASTERN INSTRUMENTS CentriFlow Quick Start Manual preview
CentriFlow
Brand: EASTERN INSTRUMENTS Pages: 3
OHAUS T51 Calibration Manual preview
T51
Brand: OHAUS Pages: 2
Radio Shack TRS-80 Owner'S Manual preview
TRS-80
Brand: Radio Shack Pages: 44
Radiodetection RD8100 Quick Locating Manual preview
RD8100
Brand: Radiodetection Pages: 2
Xylem YSI Pro1030 User Manual preview
YSI Pro1030
Brand: Xylem Pages: 19
Keeler KAT R Instructions For Use Manual preview
KAT R
Brand: Keeler Pages: 68
HANSA-FLEX HK S TKV User Manual preview
HK S TKV
Brand: HANSA-FLEX Pages: 23
Magnescale DK812S Series Instruction Manual preview
DK812S Series
Brand: Magnescale Pages: 64
Keithley SourceMeter 2430 Service Manual preview
SourceMeter 2430
Brand: Keithley Pages: 141
Tektronix KEITHLEY 4200-CVU-PWR Quick Start Manual preview
KEITHLEY 4200-CVU-PWR
Brand: Tektronix Pages: 6
horiba TW-100 Instruction Manual preview
TW-100
Brand: horiba Pages: 175
LORECa Hearing Instrument PKA87 User Manual preview
PKA87
Brand: LORECa Hearing Instrument Pages: 43
Waves GRAND RHAPSODY PIANO User Manual preview
GRAND RHAPSODY PIANO
Brand: Waves Pages: 19
BGS technic BGS 8639 Instruction Manual preview
BGS 8639
Brand: BGS technic Pages: 16
Trotec OZ-ONE Manual preview
OZ-ONE
Brand: Trotec Pages: 8

Brands by name

Popular brands

Load more brands