EXFO MAX-800 Series User Manual Download Page 346

Page: 346 / 495

Test Functions

338

MAX-800 Series

OH - OTN

OH - OTN

From the

Test

menu, tap

Functions

, and the

tab.

TX and RX buttons

Allows respectively modifying (

button) the overhead information to be

transmitted or viewing (

button) the overhead information received.

Default OTN OH

Returns all TX overhead bytes to their factory default values.

TX/RX

Overhead bytes are organized using rows and columns structure as per
G.709 standard.

Row 1



OA1

and

OA2

, columns 1-6, OTU FAS: All the Frame Alignment Signal

OA1

bytes and

OA2

bytes are individually configurable from

The default values are

for all

OA1

bytes and

for all

OA2

bytes.



MFAS

, column 7, OTU MFAS: The Multi-Frame Alignment Signal byte is

not configurable.

Summary of Contents for MAX-800 Series
















































































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-800 Series

Reviews:

Related manuals for MAX-800 Series

Brands by name

Popular brands

EXFO MAX-800 Series, User Manual

Search results

Summary of Contents for MAX-800 Series

Reviews:

Related manuals for MAX-800 Series

Brands by name

Popular brands