EXFO MAX-800 Series, User Manual

Page: 81 / 495

Test Setup - Test Configurator, Timer, and System
MaxTester
73
Modify Structure Button

Connector allows the selection of the unit’s port.

Framing , available for EtherBERT test application, allows the selection
of the test framing type; otherwise the framing is set to Framed Layer 2.
See
Network on page 134 for more information on frame format.
The framing is not configurable and set to Framed Layer 2 for 100GE
dual port topology.

Framed Layer 1 : Frame of x bytes that allows connection to any
interface that complies with 802.3 Ethernet PHY or DWDM fibre.
Available with rate up to 10G WAN.

Framed Layer 2
: Frames of x
1
bytes without network layer (
None
)
that complies with IEEE 802a Ethernet II standard.
Interface/Rate
Connector
860/860G/880 890/890Q
100GE (4 Lanes) [103.125 Gbit/s] - Port A1/A2 - QSFP28
10GE WAN
10GE LAN
1GE Optical
100M Optical Port 1 - SFP+
Port 2 - SFP+ Port B1/B2 - SFP28
10/100/1000M Electrical Port 1 - RJ45
Port 2 - SFP+ (RJ45)
a
a. Only available as a second port when the test application requires two ports. Ethernet 10/100/1000
Mbit/s electrical is supported when using an active copper SFP.
Port B1/B2 - SFP28 (RJ45)
1. To set the frame length, see Frame Size on page 96 for EtherBERT and page 141 for RFC 2544.